No products in the basket.
3M Mini POE Outdoor Water Filter
RM506.00 RM489.00
OUT OF STOCK
Space-saving outdoor water filter designed for condominium. Filters all incoming water including drinking, dishwasher, clothes washer, and shower.
- Filters out dirt, mud and sand down to 5 micron size.
- Sanitary Quick Change (SQC) design – easy cartridge change-out as fast as 10 seconds.
- Helps to prevent showerhead blockage due to dirt build-up.
- Helps to prevent dirt or mud stains on your clothes in your washing machine.
- Superior flow rate: 10gpm
Size: 11cm (W) X 33cm (H)
How to change your 3M Mini POE Replacement Cartridge?
Sanitary Quick Change (SQC)
A major benefit brought by 3M to the water filtration industry is “Sanitary Quick Change” or SQC.
This means filter change is much easier, quicker and cleaner.
In Sanitary quick change systems, there is no contact with the dirty filter. The filter systems are contained in an encapsulated cartridge. This encapsulated system fits into a special head, so when change out comes the entire filter system can be removed. As the dirty filter and water remain inside the encapsulation there is no contact made by people changing the filter. This means a hygienic solution is achieved.
SQC systems as stated above typically have a special head system which simplifies the cartridge change-out, to a simple twist out of the old and twist in of the new. No tools or complicated alignment is required. No sanitisation of the filter housing is necessary as it is new and clean.
Home and Health
3M water filters provide you and your family with cleaner, clearer, better-tasting water throughout your entire home every day.
A water filter installed in your home not only ensures that you can enjoy clear tasting water straight from the tap, but you also protect your appliances from scale build-up that reduces the energy efficiency of your appliances.
Chlorine and lead can be found in our water supplies. Refer to the table below to find out the potential health effects and remedies to reduce its presence in your drinking water. It’s your right to drink clean, drink healthy.
How does it enter drinking water?
Chlorine
Many water treatment operations add Chlorine to drinking water as part of the water treatment process and to kill microbes and bacteria in swimming pools.
Lead
Lead enters drinking water supplies from the corrosion of household plumbing systems (pipes, solders, fixtures).
What are the potential health effects?
Chlorine
- Chlorine itself usually does not present major health concerns; however, it does affect water taste and odour.
- Chlorine does react with other substances present in water to produce disinfection by-products, such as Trihalomethanes (TTHM).
- Some people who drink water containing TTHM in excess of the EPA’s standard over many years may experience problems with their liver, kidneys, or central nervous system. They may also have an increased risk of getting cancer.
Lead
- Lead is a neurotoxin that accumulates in soft tissues and bone.
- Infants, children and pregnant or nursing women are at the greatest risk of lead exposure.
- At relatively low levels of exposure, these effects may include:
i) Interference with red blood cell chemistry.
ii) Delays in normal physical and mental development in babies and young children.
iii) Slight deficits in attention span.
iv) Impaired hearing.
v) Decreased learning abilities in children.
vi) Slight increases in blood pressure in some adults.
How can it be reduced in drinking water?
Chlorine
- Filter your water.
- Look for an NSF certified drinking water filtration system that is certified to reduce chlorine taste and odour and/or TTHM.
- 3M Clean Water Solutions drinking water systems are NSF certified to reduce chlorine taste and odour.
- The 3Mâ„¢ Advanced Drinking Water System also reduces TTHM.
Lead
- Filter your water.
- Look for an NSF certified drinking water filtration system that is certified to reduce lead in drinking water.
- Only use cold water for cooking and drinking: hot water leaches more contaminants from pipes and plumbing into the water.
- Flush pipes before drinking: the longer water sits in a home’s pipes, the more lead it can contain. Let the water run until it gets as cold as possible: anywhere from 30 sec to 2 min – before using.
Only logged in customers who have purchased this product may leave a review.
Related products
Sale!
-5%
Sale!
-20%
-5%
-5%
-5%
-5%
Reviews
There are no reviews yet.